Switzerland
Description
The Winter i*cept RS3 was developed specifically for compact and mid-range cars. Thanks to optimised block stiffness and improved ice traction, driving on icy roads is safer. A water drainage groove and a water and slush groove reduce the risk of aquaplaning. The new W-shaped tread pattern with inclined tread blocks ensures better steering control in the rain, and the 3D winter sipes shorten the braking distance. The optimised rubber compound reduces wear, and the new design improves road contact. This allows you to drive safely through the cold season.
Reverse V-shaped semi-sipes: The reverse V-shaped grooves are positioned opposite the main grooves and improve traction on snow-covered roads.
Improved tread block thicknesses: With narrower grooves and larger tread blocks, stiffer tyres can facilitate vehicle handling on dry roads with higher friction. By increasing the tyre’s lateral and longitudinal stiffness, drivers experience improved elasticity even at low temperatures.
Micro-edges: Lamellae at the edges of the main grooves increase the contact area and provide better traction on winding snow-covered roads.
Flexible handling even at low temperatures ensures safe and comfortable driving.
3D winter lamellae: 3D zigzag sipes reduce tread block vibration and improve the tyres' traction and braking performance.
Aqua Pine compound: The high-dose silica compound ensures improved wet handling. Natural ingredients ensure the flexibility of the rubber across a wide temperature range.
Improved braking performance in snow: Performance has been improved by 4% compared to 2D sipes.
Aqua slush edge grooves: Large V-shaped grooves allow water to drain quickly through the main grooves, reducing aquaplaning.
Various water drainage technologies ensure safe driving on rainy roads in Winter.
Water pipe groove: The water pipe groove in the shoulder block improves wet performance by draining water from the main groove.
Manufacturer information
EU Tyre Label
The Tyre Labelling Regulation determines the information that must be provided with regard to tyres' fuel efficiency, wet grip and external rolling noise. Information is also provided on the product's performance in wintery driving conditions.
Regulation EU 1222/2009, which has been in force since 01/11/2012, has been revised and will be replaced from 1 May 2021 by Regulation EU 2020/740, from which point new standards will apply. The assessment categories for fuel efficiency, wet grip and external noise have been changed and the layout of the EU label has been changed accordingly. The manufacturers' product data sheets, stored in the EU database, can be downloaded via a QR code integrated into the label. It also includes information on snow grip and ice grip for tyres that meet these criteria.
The following tyres are exempt from the regulation:
- Tyres designed to be fitted only to vehicles registered for the first time before 1 October 1990
- Remoulded tyres (until Regulation EU 2020/740 has been widened accordingly)
- Professional off-road tyres
- Racing tyres
- Tyres with additional devices to improve traction, e.g. studded tyres
- Temporary-use spare tyres (T-type tyres)
- Tyres with a speed rating below 80 km/h
- Tyres with a nominal rim diameter of 254 mm or less and 635 mm or more
Hankook
1028394
185/65 R15 92T
C
Overview of criteria and valuation classes
Fuel efficiency
Fuel consumption is dependent upon the rolling resistance of the tyres, the vehicle itself, driving conditions and driving style. The measured rolling resistance (rolling resistance coefficient) of the tyre is categorised in classes A (most efficient) to E (least efficient).
Fitting a vehicle with class A tyres all round can lead to a reduction in fuel consumption of up to 7.5%* in comparison to the same vehicle with class E tyres all round. Commercial vehicles may have even greater reductions.
(Source: Impact analysis of the European Commission
* if measured in accordance with the stated procedures in EU Regulation 2020/7400)
Please note:
Fuel consumption depends to a great extent on the individual driving style and can be reduced considerably by driving in an environmentally friendly manner. To improve fuel efficiency, tyre pressures must be checked regularly.
Wet grip
Wet grip is categorised in classes A (shortest braking distance - E (longest braking distance).
A car fitted with class A tyres can have a braking distance which is 18 m shorter than that of a car fitted with class E tyres when performing an emergency stop at 80 km/h (in average road grip conditions). *
*Source: wdk Wirtschaftsverband der deutschen Kautschukindustrie e.V. (Professional association of the German rubber industry)
Please note:
Road safety is highly dependent upon individual driving style. Stopping distances must always be observed. To improve road grip in wet conditions, tyre pressure must be checked regularly.
External rolling noise
The noise emission of a tyre has an effect upon the total noise of the vehicle and influences not only driving comfort, but also environmental noise pollution. The EU tyre label categorises extrnal rolling noise in the classes from A (quietest rolling noise level) to C (loudest rolling noise level). This is measured in decibels (dB) and compared to the European noise emission limit values for external tyre rolling noise.
A
The pictogram with the classification "A" shows that the external rolling noise of the tyre falls below the 2016 EU limit value by more than 3 dB.
B
Classification "B" means that the external rolling noise of the tyre falls below the 2016 EU limit value by up to 3 dB.
C
Classification "C" means that the specified limit value has been exceeded.
Grip in snow, winter-suitability
Tyres labelled with the 3 Peak Mountain Snow Flake, or "3PMSF" symbol, must display a specified braking or traction characteristic on a solid bed of snow in comparison to a standardised reference comparison tyre (a so-called "SRTT" - standard reference test tyre).
Please note:
For all winter and all-year tyres manufactured from 1/1/2018, the Alpine symbol is mandatory. Tyres labelled as such are tested for their snow characteristics in a standardised and globally recognised test procedure and must fulfil specified minimum requirements. These tyres provide particularly good performance with regard to safety and driving control in winter conditions - snow, icy roads and low temperatures.
