Bicycle tubesMICHELINAIRSTOP 22" 37/47-507,A34Schrader valve34 mm27.66 €
Bicycle tubesMICHELINAIRSTOP 22" 37/47-507,S29Presta valve29 mm27.66 €
Bicycle tubesSchwalbeDV8 22 28/44-484/501Dunlop valve32 mm28.78 €
Bicycle tubesSchwalbeDV8B 22 40/54-457Dunlop valve40 mm28.79 €
Bicycle tubesMICHELINAIRSTOP 22" 33/46-507,A48Schrader valve48 mm28.84 €
Bicycle tubesMICHELINAIRSTOP 22" 33/46-507,S48Presta valve48 mm28.84 €
Bicycle tubesSchwalbeAV8 22 28/44-484/501Schrader valve40 mm28.92 €
Bicycle tubesSchwalbeSV8 22 28/44-484/501Presta valve40 mm29.05 €
Bicycle tubesSchwalbeAV8 22 [25-489->28-501]Schrader valve40 mm29.10 €
Buy 22-inch bicycle tubes at great prices at reifen.com
In addition to 22-inch bicycle tubes, you will also find all standard sizes within our product range, at affordable prices. Our online shop relies exclusively on the high quality provided by a wide range of reputable bicycle tube manufacturers.
Bicycle tube material
Butyl is a very elastic, airtight, and synthetic rubber. The weight of a butyl tube depends on the respective area of use. Crucial to the quality of a butyl tube is the ratio in which the additives required for their manufacture are mixed.
Within the racing tyre segment, a butyl tube is no heavier than tubes made of thermoplastic or latex. In the mountain bike segment, this is unfortunately not the case, with butyl hoses adding more weight than products made of thermoplastic or latex.
The air loss with butyl tubes is very low.
The puncture resistance of a butyl tube is generally not so great compared to the tubes made of thermoplastic or latex.
However, one crucial criterion is the price, with butyl hoses actually cheaper than their competitors made from thermoplastic or latex.
Latex is a very light, very flexible material, which offers exceptional puncture protection. Latex tubes are coated with talcum on the outside, meaning that the tubes do not stick to the tyres. This means that the tube can avoid punctures penetrating through the casing. In this regard, it is recommended that you apply an additional layer of talc in order to increase puncture resistance. However, latex is a highly sensitive material, and as such, these tubes should not come into contact with oil or grease, and must also be protected against the influences of daylight and heat.
The high elasticity of a latex tube results in a reduced rolling resistance.
The high elasticity also has a positive influence on puncture resistance. As a result, latex tubes are much more puncture-proof than their equivalent made of butyl.
Latex tubes are extremely light.
If you want to use a latex tube, you must be aware of the fact that you have to check the tyre pressure prior to each time you set off, and carrying a pump with you is also advisable. A latex tube will lose air much more quickly than a product made of butyl or thermoplastic.
Latex tubes are more expensive than butyl tubes.
Tubes made of thermoplastic are relatively unknown. The most important difference to the butyl and latex tubes is the fact that these are made of a plastic. Tubes made of thermoplastic are extremely durable, and are much more elastic than their latex or butyl relatives.
Tubes made of thermoplastic are highly puncture-resistant, and should damage ever occur, these tubes are extremely easy to patch.
Thermoplastic tubes are incredibly lightweight. There are tubes that offer a weight saving of more than 50& compared to butyl tubes.
The roll resistance is very low on account of the flexibility of the thermoplastic tube.
A thermoplastic tube barely loses any air.