Bicycle tubesContinentalTour Tube All 28" A40 32/47-622/642Schrader valve40 mm27.94 €
Bicycle tubesContinentalTour Tube All 28" D40 32/47-622/642Dunlop valve40 mm27.94 €
Bicycle tubesContinentalTour Tube All 28" S42 32/47-622/642Presta valve42 mm27.94 €
Bicycle tubesContinentalRace Tube 28" S42 18/25-622/630Presta valve42 mm27.94 €
Bicycle tubesSchwalbeAV17 28 28/47-622/635 40mmSchrader valve40 mm28.06 €
Bicycle tubesSchwalbeSV15 28 18/28-622/630 40mmPresta valve40 mm28.13 €
Bicycle tubesContinentalTour Tube Slim 28" A40 RE 28/37-622 28/32-622/630Schrader valve40 mm28.22 €
Bicycle tubesContinentalTour Tube Slim 28" D40 RE 28/37-622 28/32-622/630Dunlop valve40 mm28.22 €
Bicycle tubesContinentalTour Tube All 28" D40 RE 32/47-622 32/42-622/635Dunlop valve40 mm28.22 €
Bicycle tubesContinentalTour Tube All 28" A40 RE 32/47-622 32/42-622/635Schrader valve40 mm28.22 €
Bicycle tubesContinentalRace Tube 28" S60 18/25-622/630Presta valve60 mm28.37 €
Bicycle tubesContinentalTour Tube All 28" S42 RE 32/47-622 32/42-622/635Presta valve42 mm28.42 €
A central element of a bicycle tyre is the bicycle tube, which has the task of absorbing the air and maintaining the air pressure inside the tyre. In the past, a bicycle tube was made of rubber; nowadays they are mostly made of butyl, sometimes also of thermoplastic or latex.
The selection of the correct tube size for the casing is not so simple, as it can be that a tube is suitable for various casing sizes. The most simple option, supposing that you haven't experience any problems previously, is to read the tube size on the tube that is to be replaced. The size specifications according to ETRTO have become the standard in this regard. If you don't have the old tube to hand, you can also read the ETRTO size specification on the casing, and look on the packaging to see if the tube fits. What is vitally important here is that you make sure you have the right valve.
Bicycle tube material
Butyl is a very elastic, airtight, and synthetic rubber. The weight of a butyl tube depends on the respective area of use. Crucial to the quality of a butyl tube is the ratio in which the additives required for their manufacture are mixed.
Within the racing tyre segment, a butyl tube is no heavier than tubes made of thermoplastic or latex. In the mountain bike segment, this is unfortunately not the case, with butyl hoses adding more weight than products made of thermoplastic or latex.
The air loss with butyl tubes is very low.
The puncture resistance of a butyl tube is generally not so great compared to the tubes made of thermoplastic or latex.
However, one crucial criterion is the price, with butyl hoses actually cheaper than their competitors made from thermoplastic or latex.
Latex is a very light, very flexible material, which offers exceptional puncture protection. Latex tubes are coated with talcum on the outside, meaning that the tubes do not stick to the tyres. This means that the tube can avoid punctures penetrating through the casing. In this regard, it is recommended that you apply an additional layer of talc in order to increase puncture resistance. However, latex is a highly sensitive material, and as such, these tubes should not come into contact with oil or grease, and must also be protected against the influences of daylight and heat.
The high elasticity of a latex tube results in a reduced rolling resistance.
The high elasticity also has a positive influence on puncture resistance. As a result, latex tubes are much more puncture-proof than their equivalent made of butyl.
Latex tubes are extremely light.
If you want to use a latex tube, you must be aware of the fact that you have to check the tyre pressure prior to each time you set off, and carrying a pump with you is also advisable. A latex tube will lose air much more quickly than a product made of butyl or thermoplastic.
Latex tubes are more expensive than butyl tubes.
Tubes made of thermoplastic are relatively unknown. The most important difference to the butyl and latex tubes is the fact that these are made of a plastic. Tubes made of thermoplastic are extremely durable, and are much more elastic than their latex or butyl relatives.
Tubes made of thermoplastic are highly puncture-resistant, and should damage ever occur, these tubes are extremely easy to patch.
Thermoplastic tubes are incredibly lightweight. There are tubes that offer a weight saving of more than 50& compared to butyl tubes.
The roll resistance is very low on account of the flexibility of the thermoplastic tube.
A thermoplastic tube barely loses any air.
The only disadvantage of these tubes is the price, which is actually comparatively high.