Germany
Description
Safe driving at high speeds
Safe and stable on wet roads
Uncompromising safety on slippery roads
Aramid reinforcement belt: The aramid reinforcement belt is made from the highest quality material available for Tyres today. The optimised shape of the contact area is maintained, enabling excellent handling.
Particularly stiff outer shoulder: The outer blocks and shoulders of the tyre, where high loads and contact pressure are concentrated when cornering, are widened. Maximum steering grip is ensured by the dual effect of the aramid hybrid reinforcement belt, which ensures a flat contact patch in all conditions. This also improves dry handling by 15%.
Interlocking grooves: The Ventus S1 evo 3 is equipped with interlocking outer grooves that ensure grip on wet roads and prevent aquaplaning on slippery surfaces. This enhances its power on wet roads and when cornering in the rain without compromising handling on dry roads.
Highly enriched synthetic silica compound (HSSC): HSSC (Highly Enriched Synthetic Silica Compound) is a new compound in which highly purified, high-quality silica is vulcanised at low temperatures for twice as long as in conventional Tyres. This allows for better mixing of the molecules, ensuring solid handling and higher mileage.
Improved heat circulation and air permeability: In addition to the effectiveness of heat circulation and air permeability through the use of repeating structured units, the double-sized siping pattern ensures the correct spacing and height differences. This results in improved Driving comfort.
ProMileage technology: Mileage is significantly improved by ProMileage technology. This technology ensures that the Tyres' contact with the road is maximised and that forces are evenly distributed during acceleration, braking and cornering.
Dual pitch on the inside: Offers improved power in terms of aquaplaning and braking on wet roads by increasing the number of inner divisions (blocks) to utilise the recesses for improved water drainage.
Dual pitch on the outside: The number of outer sipes is optimised to ensure the steering precision required for dry cornering, which also helps to reduce tread noise.
Manufacturer information
EU Tyre Label
The Tyre Labelling Regulation determines the information that must be provided with regard to tyres' fuel efficiency, wet grip and external rolling noise. Information is also provided on the product's performance in wintery driving conditions.
Regulation EU 1222/2009, which has been in force since 01/11/2012, has been revised and will be replaced from 1 May 2021 by Regulation EU 2020/740, from which point new standards will apply. The assessment categories for fuel efficiency, wet grip and external noise have been changed and the layout of the EU label has been changed accordingly. The manufacturers' product data sheets, stored in the EU database, can be downloaded via a QR code integrated into the label. It also includes information on snow grip and ice grip for tyres that meet these criteria.
The following tyres are exempt from the regulation:
- Tyres designed to be fitted only to vehicles registered for the first time before 1 October 1990
- Remoulded tyres (until Regulation EU 2020/740 has been widened accordingly)
- Professional off-road tyres
- Racing tyres
- Tyres with additional devices to improve traction, e.g. studded tyres
- Temporary-use spare tyres (T-type tyres)
- Tyres with a speed rating below 80 km/h
- Tyres with a nominal rim diameter of 254 mm or less and 635 mm or more
Hankook
1019621
225/50 R17 98Y
C
Overview of criteria and valuation classes
Fuel efficiency
Fuel consumption is dependent upon the rolling resistance of the tyres, the vehicle itself, driving conditions and driving style. The measured rolling resistance (rolling resistance coefficient) of the tyre is categorised in classes A (most efficient) to E (least efficient).
Fitting a vehicle with class A tyres all round can lead to a reduction in fuel consumption of up to 7.5%* in comparison to the same vehicle with class E tyres all round. Commercial vehicles may have even greater reductions.
(Source: Impact analysis of the European Commission
* if measured in accordance with the stated procedures in EU Regulation 2020/7400)
Please note:
Fuel consumption depends to a great extent on the individual driving style and can be reduced considerably by driving in an environmentally friendly manner. To improve fuel efficiency, tyre pressures must be checked regularly.
Wet grip
Wet grip is categorised in classes A (shortest braking distance - E (longest braking distance).
A car fitted with class A tyres can have a braking distance which is 18 m shorter than that of a car fitted with class E tyres when performing an emergency stop at 80 km/h (in average road grip conditions). *
*Source: wdk Wirtschaftsverband der deutschen Kautschukindustrie e.V. (Professional association of the German rubber industry)
Please note:
Road safety is highly dependent upon individual driving style. Stopping distances must always be observed. To improve road grip in wet conditions, tyre pressure must be checked regularly.
External rolling noise
The noise emission of a tyre has an effect upon the total noise of the vehicle and influences not only driving comfort, but also environmental noise pollution. The EU tyre label categorises extrnal rolling noise in the classes from A (quietest rolling noise level) to C (loudest rolling noise level). This is measured in decibels (dB) and compared to the European noise emission limit values for external tyre rolling noise.
A
The pictogram with the classification "A" shows that the external rolling noise of the tyre falls below the 2016 EU limit value by more than 3 dB.
B
Classification "B" means that the external rolling noise of the tyre falls below the 2016 EU limit value by up to 3 dB.
C
Classification "C" means that the specified limit value has been exceeded.
Customer reviews (163)
Tyre insurance
more information
For consumers only
more informationOnly for consumers
Europe-wide protection
One-off contribution
- Accident, e.g. flat tyre
- Vandalism
- Theft
- 100% reimbursement of the costs for tires up to 12 months of age/running time
- 70% reimbursement of costs for tires with an age/running time of 13 to 24 months
- 100% reimbursement of repair costs
- No allowance per tire
- Accident, e.g. flat tyre
- Vandalism
- Theft
- 100% reimbursement of the costs for tires up to 12 months of age/running time
- 70% reimbursement of costs for tires with an age/running time of 13 to 24 months
- 100% reimbursement of repair costs
- 15,- € allowance per tire
- The contribution is paid once in advance and is valid for the selected term
- Europe-wide protection
- Insurance starts when the goods are handed over at a reifen.com branch or on receipt of the policy after online purchase
- Insurance ends with the occurrence of the damage or the end of the contract
Product Safety Information
Manufacturer
Product safety contact (not customer support)
Compatible items
